HILTI ANCHORS DOWNLOAD CRACKED
HILTI ANCHORS DOWNLOAD MANUAL

Reduction factor for pullout strength2 p - 0,45 0,65 0,55 Axial Stiffness in Service Load RangeДЄxial stiffness, in service load range uncracked concrete uncr Reduction factor for pullout strength2 p - 0,45 0,65 0,55 Pullout Strength in Tension (Seismic Applications) (ACI 318 D.5.3)Д¬haracteristic pullout strength, seismic (20 MPa)3 Neq

HILTI ANCHORS DOWNLOAD CRACKED

Reduction factor for steel strength4 sa - 0,75 0,75 0,65 Concrete Breakout Strength in Tension (ACI 318 D.5.2)Д®ffectiveness factor uncracked concrete kuncr - 24 Effectiveness factor cracked concrete kcr - 17 Modification factor for cracked and uncracked concrete c,N - 1 Reduction factor for concrete breakout strength2 cb - 0,45 0,65 0,55 Pullout Strength in Tension (Non-seismic Applications) (ACI 318 D.5.3)Д¬haracteristic pullout strength, uncracked concrete (20 MPa)3 Np,uncr Steel Strength in Tension (ACI 318 D 5.1)4 M10 M12 M16 Anchor category 1, 2, or 3 3 1 2

TABLE 2 HILTI HST TENSION STRENGTH DESIGN DATA1,2,3,4ДESIGN INFORMATION Symbol Units Nominal anchor diameter 2These values are only valid for concrete strength 20 MPa (2900 psi) Minimum specified ultimate strength futa N/mm2 800 800 720 (lb/in2) (116000) (116000) (105000)ДЇor SI: 1 inch = 25,4 mm, 1 ft-lbf = 1,356 Nm, 1 psi = 6,89 Pa, 1 in2 = 645 mm2, 1 lb/in = 0,175 N/mm 1The data presented in this table is to be used in conjunction with the design criteria of ACI 318 Appendix D. Required installation torque Tinst Nm 45 60 110 TABLE 1 INSTALLATION INFORMATION AND ANCHOR SPECIFICATIONS CARBON STEEL HST1Д¬haracteristic Symbol Units Nominal anchor diameter For additional technical data or product information, please note the indicated approvals and certificates. Seismic tests have been conducted in accordance with ACI 355.2, Qualification of Post-Installed Mechanical Anchors in Concrete. Seismic technical data has been determined through testing with an external accredited laboratory per ICC-ES AC193 test number 18 for seismic pulsating tension and test number 19 for alternating seismic shear.

HILTI ANCHORS DOWNLOAD MANUAL

date of issue European technical approval DIBt, Berlin ETA-98/0001 / Shockproof fastenings in civil defence installationsДЇederal Office for Civil Protection, Bern BZS D 08-602 / ДЇire test report DIBt, Berlin ETA-98/0001 / Fire test report ZTV-Tunnel IBMB, Braunschweig UB 3332/0881-2 / Assessment report (fire) Warringtonfire WF 166402 / ДЄ) Additional technical data and product information given in the Hilti Fastening Technology Manual A note regarding the provided design data All data in this report is formatted for design with ACI 318-08, Appendix D (American Concrete Institute). Safety wedge for certain follow up expansionДЄdditional approvals / certificates according to European regulationsa Description Authority / Laboratory No. Embedment depth clearly marked on anchor HST stud anchor seismic design data Anchor version Benefits Technical data HST Carbon steel stud anchor HST M10, M12, M16 Seismic design data

Hilti anchors download